Samsung clx-3170fn printer manual

The detected OS is the operating system that we have detected you are using. We will offer drivers and other solutions in this OS first. If you wish to see solutions related to another OS, please select the preferred operating system and version and choose 'Change'. Select an operating system and version to see available software for this product.

Detected operating system: Selected operating system: Select your operating system and version ,. HP is compiling your results. This could take up to 3 minutes, depending on your computer and connection speed. Thank you for your patience. We were unable to retrieve the list of drivers for your product. We were unable to find drivers for your product. Try manually selecting your operating system.

If your operating system is not listed then HP may not provide driver support for your product with that operating system. Read more: I don't see my operating system. We were unable to find any drivers for your product. Drivers may be in development so please check back at a later date or visit the product homepage. Here is the List. Let us detect the drivers you need for this HP PC. Our automated tool will simplify the choices you have to make. Skip the confusion of sorting through all of our drivers and let us detect only the ones you need.

Driver detection is now available for the desktop download experience. Give it a try on your PC! You only need to do this once to guarantee a faster support experience at any time. Learn more. HP Support Solution Framework is downloading. Locate the file in your browser window, and double-click to begin installing.

Wait until the installation has finished then click on continue. Visit the product home page for more support options. The PC you are currently using does not match the PC you have selected. To detect drivers for the PC you have selected, initiate detection from that PC or click on "All Drivers" below and download the drivers you need.

Driver detection is temporarily unavailable. Please try again later. HP has scanned your product but currently has no suggestions for driver updates. The list of all available drivers for your product is shown above. HP encountered an error while trying to scan your product. Please verify your product is powered on and connected, then try again in a few minutes.

Or, view all available drivers for your product below. Not sure which drivers to choose? Let HP identify any out-of-date or missing drivers and software. This program is for manually setting the network IP address of your. When the driver CD runs autom atically, close that window. Start a web browser such as Internet Explorer and open the X drive. Double-click Setup. Click OK. If necessary, select a language from the drop-down list.

Follow the instructions in the wi ndow and complete the installation. Otherwise, you may proceed to the. If you are unsure of this requirement ask the system. In most. You wil l be. Ask a question. Related product manuals. What is the best way to remove jammed paper from my printer? It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges? Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller. How come my prints are of poor quality? There can be various reasons for poor print quality.

Double-click Setup. Click OK. Follow the instructions in the window and complete the installation. See "Printing reports" on page Click OK , then the machine prints the network information.

Confirm the settings are correct. Click Exit. You have to install the machine software for printing. The software includes drivers, applications, and other user friendly programs. The following procedure is based on Windows XP. If you want to connect a machine with a USB cable, refer to Software section. Connect the network cable to your machine. Make sure that the network setup for your machine is completed. See "Setting up the network" on page All applications should be closed on your computer before beginning installation.

Click Next. Select Typical installation for a network printer , and then click Next. The list of machines available on the network appears. Select the printer you want to install from the list and then click Next. To add the machine to the network, enter the port name and the IP address for the machine. If you are not sure of the IP address, contact your network administrator or print network information.

After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you wish to do so, select the corresponding checkbox es and click Finish. If you use a different Windows location, you must change the paper size to match the paper you usually use.

Go to printer properties to change the paper size after installation is complete. You must configure the appropriate network parameters to use your printer in a wireless network. To do this, you can use both control panel and SyncThru Web Service , an embedded web site of your printer.

This section gives you basic information on You can retrieve basic settings by selecting a wireless network or manually configure them as you need. If you do not know about your wireless environment, please ask the network administrator. Press Menu on the control panel until you see Network on the bottom line of the display and press OK. The wireless network interface card on your machine searches for wireless network in the area and shows the results.

A device that has a proper WEP Key can access the network. The Key length should be between 8 to 63 characters long. Press OK. SSID is case-sensitive so you need to enter it carefully. Select the type of wireless connections. Go to step 4. In Ad-Hoc mode, even if the network cable is connected, your printer will use the wireless interface.

Go to step 5. If you select Auto , the wireless network interface card on your machine will automatically adjust the channels. Open system is used for IEEE A device that has a proper WEP key can access the network. This uses a shared secret key generally called Pre Shared Key passphrase that is manually configured on the access point and each of its clients. If you select Infrastructure in Operation Mode , you must disconnect the network cable to activate wireless network after completing the network setting.

You can retrieve basic settings by selecting a wireless network. Prior to wireless network settings, you should set IP address for the machine first. Click Network Settings and Wireless. Select Wizard in Wireless Settings. Access points and wireless devices attempting to connect to a specific wireless network must use the same SSID.

The SSID is case-sensitive. If wireless security setting window appears, enter the registered password and click Next. Wizard Setup Confirmation window appears, please check your wireless setup. If the setup is right, click Apply.

Select Custom in Wireless Settings. Select Operation Mode from the drop-down list. If you select Auto Setting , the wireless network interface card on your machine will automatically adjust the channels. Select Authentication from the drop-down list. Select Encryption from the drop-down list.

Wireless Setup Confirmation window appears, please check your wireless setup. After installation is complete, you may want to set the machine's default settings. Refer to the next section if you would like to set or change values. The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level.

The following information will guide you on how to set your machine to the best print quality or best quality of print. Before you set the altitude value, find the altitude where you are using the machine. Ensure that you have installed the printer driver with the provided Printer Software CD. Click Printer Setting. Select the appropriate value from the dropdown list, and then click Apply.

If your machine is connected to a network, SyncThru Web Service screen appears automatically. Select the appropriate altitude value, and then click Apply. Press OK when Machine Setup appears. The current date and time are shown on the display when your machine is on and ready to work. Enter the correct time and date using the number keypad. You can change the clock mode to hour format e.

For details, see the next section. Press OK to save the time and date. When you enter a wrong number, Out of Range appears and the machine does not proceed to the next step.

If this happens, simply reenter the correct number. You can set your machine to display the current time using either a hour or hour format. Your machine is preset to Copy mode. You can switch this default mode between Fax mode and Copy mode. With this option set to On , a tone sounds each time a key is pressed. With this option set to On , an alarm tone sounds when an error occurs or fax communication ends. With this option set to Comm.

You can adjust the volume level using On Hook Dial. For the ringer volume, you can select Off , Low , Mid , and High. If necessary, repeat steps 3 through 5 to set other sounds. Press On Hook Dial. A dial tone sounds from the speaker. As you perform various tasks, you may need to enter names and numbers. When you store fax numbers or email addresses in memory, you may also enter the corresponding names. When you are prompted to enter a letter, locate the button labeled with the character you want.

Press the button until the correct letter appears on the display. For example, to enter the letter O , press 6 , labeled with MNO. Each time you press 6 , the display shows a different letter, M , N , O , m, n, o and finally 6.

You can enter special characters, such as space, plus sign, and etc. For details, see the below section. To enter additional letters, repeat step 1. The cursor will move to the right and the next letter will appear on the display. When you have finished entering letters, press OK. Then enter the correct number or character. With some telephone systems, you must dial an access code 9, for example and listen for a second dial tone.

In such cases, you must insert a pause in the telephone number. You can insert a pause while you are setting up speed dial numbers. A - appears on the display at the corresponding location.

Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.

This is the option to set the machine to continue printing or not, in case the paper size you have set and the paper within the tray mismatches. Press OK to save your selection. This chapter introduces you how to load originals and print media into your machine. You can use the scanner glass or ADF to load an original for copying, scanning, and sending a fax. Make sure that no originals are in the ADF.

If an original is detected in the ADF, the machine gives it priority over the original on the scanner glass. To get the best scan quality, especially for colored or gray-scaled images, use the scanner glass.

Place the original face down on the scanner glass and align it with the registration guide at the top left corner of the glass. You may get hurt. It is harmful for your eyes and it can be dangerous. Always keep it clean. If the book or magazine is thicker than 30 mm, start copying with the lid open. Flex or fan the edge of the paper stack to separate the pages before loading originals. Load the original face up into the ADF. Make sure that the bottom of the original stack matches the paper size marked on the document input tray.

Adjust the document width guides to the paper size. Dust on the ADF glass may cause black lines on the printout. You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies.

Always use print media that meet the guidelines for use with your machine. When you choose print materials, consider the following:. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. Using print media that does not meet these specifications may cause problems, requiring repairs. Make sure not to use the inkjet photo paper with this machine.

It could cause damage to the machine. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.

Smoothness: to sheffield. Using photographic paper or coated paper may cause problems, requiring repairs. To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray.

To change the tray 1 size to other size, you must adjust the paper length guide properly. Pull the tray 1 out of the machine. Open the paper cover and remove paper from the tray 1 if necessary. Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually.

Load paper into the tray. Slide the paper length guide until it lightly touches the end of the paper stack. Squeeze the paper width guide and slide it to the edge of the paper stack without causing it to bend. For paper smaller than Letter-sized, return the paper guides to their original positions and adjust the paper length guide and paper width guide. If the paper that you need to print is shorter than length mm 8. Adjust the paper length guide and paper width guide.

Close the paper cover. Slide the tray 1 back into the machine. After loading paper, set the paper type and size for the tray. See "Setting the paper size and type" on page The printed side should be facing up with an uncurled edge at the front.

If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed. Open the paper cover and remove paper from the tray if necessary. If you want to change the size to A4, first move the paper width guide to left and rotate the lever counterclockwise.

If you force the lever, it could damage the tray. The machine can hold special sizes and types of print material, such as postcards, note cards, and envelopes.

Especially, it is useful for single page printing on letterhead or colored paper. This also applies to other types of print media. Place print materials in the center of the tray. See "Selecting print media" on page Load the paper. See "Changing the size of the paper in the paper tray" on page Depending on the media type you are using, keep the following loading guidelines:. When you print in application, start the print menu.

Before you print, open printer properties. Press the Paper tab in printer properties, and select an appropriate paper type.

If you want to use a label, set the paper type to Label. Select Manual Feeder in paper source, then press OK. Start printing in application. Press the Color Start or Black Start button on the machine to start feeding, then the machine starts printing. Repeat this step for every page to be printed.

After loading paper in the paper tray, you need to set the paper size and type using the control panel buttons. These settings will apply to Copy and Fax modes. For PC-printing, you need to select the paper size and type in the application program you use on your PC.

Press OK when Paper Size appears. If you want to use special sized paper such as billing paper, select Custom in the Paper tab in the printer properties. Press Copy. Ready to Copy appears on the top line of the display. Load originals face up into the ADF, or place a single original face down on the scanner glass. Enter the number of copies using the number keypad, if necessary. If you want to customize the copy settings including copy size, darkness, and original type, by using the control panel buttons.

See "Changing the settings for each copy" on page If necessary, you can use special copy features, such as 2-up or 4-up copying.

Press Color Start to begin color copying. Or, press Black Start to begin black and white copying. You can cancel the copy job during an operation. Your machine provides default settings for copying so that you can quickly and easily make a copy.